Numerical investigation of fluid flow behavior in steel cord with lattice Boltzmann methodology: The impacts of microstructure and loading force.

Steel cord materials were found to have internal porous microstructures and complex fluid flow properties. However, current studies have rarely reported the transport behavior of steel cord materials from a microscopic viewpoint. The computed tomography (CT) scanning technology and lattice Boltzmann method (LBM) were used in this study to reconstruct and compare the real three-dimensional (3D) pore structures and fluid flow in the original and tensile (by loading 800 N force) steel cord samples. The pore-scale LBM results showed that fluid velocities increased as displacement differential pressure increased in both the original and tensile steel cord samples, but with two different critical values of 3.3273 Pa and 2.6122 Pa, respectively. The original steel cord sample had higher maximal and average seepage velocities at the 1/2 sections of 3D construction images than the tensile steel cord sample. These phenomena should be attributed to the fact that when the original steel cord sample was stretched, its porosity decreased, pore radius increased, flow channel connectivity improved, and thus flow velocity increased. Moreover, when the internal porosity of tensile steel cord sample was increased by 1 time, lead the maximum velocity to increase by 1.52 times, and the average velocity was increased by 1.66 times. Furthermore, when the density range was determined to be 0-38, the pore phase showed the best consistency with the segmentation area. Depending on the Zou-He Boundary and Regularized Boundary, the relative error of simulated average velocities was only 0.2602 percent.

Assessment of wellbore integrity failure risk and hazardous zones in depleted reservoirs underground gas storage during the operation processes.

Depleted reservoirs are widely used for underground gas storage due to their advantages of low construction cost and easy development. Under the influence of complex geological conditions and frequent operations, the integrity of the wells in depleted reservoirs is prone to failure, which would potentially lead to gas leakage. In this study, by using a finite element-based computational fluid dynamics model, we have developed evaluation criteria for assessing the severity of the occurred wellbore integrity failure and the risk of the un-occurred wellbore integrity failures respectively to identify hazardous zones potentially prone to wellbore integrity failure. The study results indicate that the gas storage wellbore integrity failure is prone to occur inside the wellbore structure in the direction of the minimum ground stress near the lower boundary of the formation interlayer. The wellbore integrity failure hazardous zones are mainly concentrated at the formation interlayer boundaries. The practical guidelines and solutions derived from current research results can provide an accurate direction for monitoring and protecting work of wellbore integrity and avoid environment pollution problems caused by natural gas leakage.

Optimization of High Temperature-Resistant Modified Starch Polyamine Anti-Collapse Water-Based Drilling Fluid System for Deep Shale Reservoir.

During drilling in deep shale gas reservoirs, drilling fluid losses, hole wall collapses, and additional problems occur frequently due to the development of natural fractures in the shale formation, resulting in a high number of engineering accidents such as drilling fluid leaks, sticking, mud packings, and buried drilling tools. Moreover, the horizontal section of horizontal well is long (about 1500 m), and the problems of friction, rock carrying, and reservoir pollution are extremely prominent. The performance of drilling fluids directly affects drilling efficiency, the rate of engineering accidents, and the reservoir protection effect. In order to overcome the problems of high filtration in deep shale formations, collapse of borehole walls, sticking of pipes, mud inclusions, etc., optimization studies of water-based drilling fluid systems have been conducted with the primary purpose of controlling the rheology and water loss of drilling fluid. The experimental evaluation of the adsorption characteristics of "KCl + polyamine" anti-collapse inhibitor on the surface of clay particles and its influence on the morphology of bentonite was carried out, and the mechanism of inhibiting clay mineral hydration expansion was discussed. The idea of controlling the rheology and water loss of drilling fluid with high temperature resistant modified starch and strengthening the inhibition performance of drilling fluid with "KCl + polyamine" was put forward, and a high temperature-resistant modified starch polyamine anti-sloughing drilling fluid system with stable performance and strong plugging and strong inhibition was optimized. The temperature resistance of the optimized water-based drilling fluid system can reach 180 °C. Applied to on-site drilling of deep shale gas horizontal wells, it effectively reduces the rate of complex accidents such as sticking, mud bagging, and reaming that occur when resistance is encountered during shale formation drilling. The time for a single well to trip when encountering resistance decreases from 2-3 d in the early stages to 3-10 h. The re-use rate of the second spudded slurry is 100 percent, significantly reducing the rate of complex drilling accidents and saving drilling costs. It firmly supports the optimal and rapid construction of deep shale gas horizontal wells.

A magnetic and magneto-optical investigation of Co-Pt alloy nanowire arrays.

We have investigated the magneto-optical properties of highly ordered Co-Pt alloy nanowire arrays embedded in anodic aluminum oxide templates. The magnetic field-dependent Stokes parameters, Faraday rotation angle and ellipticity were investigated by an in-house magneto-optical measurement system. The extracted hysteresis loops are broadly consistent with magnetic hysteresis loops obtained from the vibrating sample magnetometer. The maximum Faraday rotation angle and ellipticity of these samples were examined as a function of nanowire composition. With an increase of platinum content from 9 at.% to 86 at.% in the as-deposited nanowire arrays, the maximum Faraday rotation angle per length decreases linearly from 1.39 x 10(3) degrees/cm to 1.58 x 10(2) degrees/cm. The maximum ellipticity shows a similar behavior with the composition. These linear relationships suggest a dilution model for the magnetic moment in the alloy nanowires. Our results indicate that magneto-optical measurements comprise an effective and sensitive method for monitoring the behavior of AAO-based magnetic nanowire arrays.